Select A Tool - Sony IPELA PCS-G70 Operating Instructions Manual

Select a tool

By clicking a tool button on the top part of the page, you can jump to the
corresponding tool page. A brief introduction of each tool is presented below.
[Controller]
Controls the PCS-G70/G70P using the on-screen controller, or controls using
the on-screen Remote Commander in the same manner as you do with the
PCS-RG70 Remote Commander.
[Dial/Disconnect]
Calls a remote party, or ends a meeting.
[Phone Book]
Displays the dial list.
Connects from the dial list.
Registers, confirms or edits the dial list.
For a private address book, the "Phone Book" button changes to
the "Private Phone Book" button.
[Setup]
Confirms or modifies the setup.
Sends messages.
Resets the setup functions (only when "sonypcs" has been entered as the user
name).
[Info]
Displays the connection status, line status, or other machine information.
Displays the "Cause Code."
Displays the "Call Log"(only when "sonypcs" has been entered as the user
name).
[Monitor]
Monitors a meeting being held with the PCS-G70/G70P over the Web.
Note
When Web Monitor is set to Off in the Administrator Setup menu, the "Monitor" page
cannot be used.
252
Select a tool