Sony IPELA PCS-G70 Operating Instructions Manual page 71

ISDN Page 1/4
Country/Region
Allows you to select the country or region
where you are using the Communication
Terminal. You can select between Europe
(except France), France, Japan, USA, China,
and Other.
Protocol
Allows you to select the protocol of the
ISDN lines to be used. You can select Japan
(NTT), Euro ISDN, Euro ISDN (France),
National ISDN, 5ESS (P-MP), 5ESS (P-P),
or DMS-100, depending on the interface that
you are using.
You can select Japan (NTT), Euro ISDN,
Euro ISDN (France), National ISDN,
5ESS(P-MP), 5ESS(P-P) or DMS-100
depending on the interface you are using.
CRC4
Select whether to enable CRC4. This option
should normally be enabled.
Note
The "CRC4" option appears when using the
PCSA-PRI.
For customers in the USA and Canada, see
"SPID Settings for Customers in the USA
and Canada" on page 72.
ISDN Page 2/4
ISDN Setup
Page: 2/3
Area Code
A1
A2
B1
B2
C1
C2
Area Code
Enter the area code of the ISDN line to be
used. Do not enter the first 0 of the area code.
Local Number
Enter the line number (local number) of the
ISDN line to be used.
ISDN Page 3/4
The A1 to C2 fields appear.
ISDN Setup
Page: 3/3
Sub Address
A1
A2
B1
B2
C1
C2
Sub Address
Enter sub-addresses when registering them.
Sub-addresses can only be composed of
numbers.
Notes
• When you select an empty field and then
press the PUSH ENTER button of the
Remote Commander, the setting of the
previous field is copied into the selected
field.
Registering Local Information
Local Number
Save Cancel
Save Cancel
71