Receiving A Call From A Remote Party - Sony IPELA PCS-G70 Operating Instructions Manual

"Dial", then perform steps 2 to 4 of the procedure in "To call a remote party
not registered in the Phone Book" on page 231.
Repeat this procedure for each remote party.
To dial the remote parties for a multipoint videoconference simultaneously
You can register a "multipoint connection list for SIP" that includes all remote
parties for a multipoint videoconference using SIP in the Phone Book.
Set up the list following "Registering the Remote Parties in the Multipoint
Connection List" on page 203 of Chapter 8.
Register each remote party as follows:
1 Select "Multipoint" under "Line I/F".
2 Select the line interface icon " " (or a preferred still image).
3 Select "SIP" from the drop-down list on the right of the text box.
4 Enter the address of the remote party for SIP connection.
When you start a multipoint videoconference, select the "multipoint
connection list for SIP"and press the CONNECT/DISCONNECT ( / )
button on the Remote Commander. The system then dials all the remote parties
registered in the list.

Receiving a Call from a Remote Party

Operations are the same as those for a point-to-point conference.
For details, see "Receiving a Call from a Remote Party" on page 102.
243
Starting a Videoconference Using SIP