System Configuration Via A Lan And Isdn For Multipoint Data Conference - Sony IPELA PCS-G70 Operating Instructions Manual

System Configuration via a LAN and ISDN for Multipoint Data
Conference
Installing the optional PCSA-M3G70 H.323 MCU software, the PCSA-
M0G70 H.320 MCU software, and using the optional Data Solution Box
PCSA-DSB1S and ISDN Units PCSA-B384S, PCSA-B768S, or PCSA-PRI
enables you to conduct multipoint mixed LAN and ISDN line multipoint data
conferences. Two Communication Terminals where the MCU software is
installed must be connected via a LAN in this configuration.
This allows you to:
• Hold a multipoint videoconference among up to six sites over ISDN.
• Show still images stored on a "Memory Stick".
• Use data from a computer or other such peripheral device in the
videoconference.
• Show still images or computer data on the second monitor or projector used
as the display device.
• Connect up to five external microphones to the Data Solution Box, allowing
you to hear several participants.
System configuration
1 PCS-PG70/PG70P Communication Terminal
2 PCSA-CG70/CG70P Camera Unit (not supplied)
3 PCS-RG70 Remote Commander
4 Remote Control Receiver
5 TV monitor (not supplied)
6 PCSA-M3G70 H.323 MCU software (not supplied)
7 PCSA-DSB1S Data Solution Box (not supplied)
8 PCS-A1 Microphone (not supplied)
9 PCSA-M0G70 H.320 MCU software (not supplied)
0 PCSA-B384S, PCSA-B768S or PCSA-PRI ISDN Unit (not supplied)
26
System Configuration
*
Be sure to connect two
Communication Terminals, with
the MCU software installed, via
a LAN.
*
The illustration shows an
example using the PCSA-B768S
ISDN Unit.