Sony IPELA PCS-G70 Operating Instructions Manual page 187

When the PCS-PG70/PG70P is used as a receiving terminal
Monitor used to
display the picture of
the Data solution Box
VIDEO OUT 1 or
VIDEO OUT 2
RGB OUT
DSB
Using Audio/Video Signal from the Connected Equipment for a Conference
Output Resolution
connector for a
computer
picture on
receiving
terminal
a
VIDEO OUT 1
or VIDEO OUT
2 on the PCS-
PG70/PG70P
RGB OUT
on the
PCS-PG70/
PG70P
RGB OUT
on the
PCSA-DSB1S
(only when the
PCSA-DSB1S
is enabled)
Video Picture quality
frame
rate
a
Outputs the signal by
converting a transmitted VGA,
SVGA or XGA signal into a
4CIF signal. The original high-
resolution picture cannot be
obtained and details cannot be
clearly seen. The number of
frames displayed per second
depends on the interface
transmission rate. For example,
one frame per second is
obtained at 1 Mbps.
a
Outputs the signal by
converting a transmitted VGA,
SVGA or XGA signal into an
XGA signal. The high-
resolution picture can be
obtained. The number of frames
displayed per second depends
on the interface transmission
rate. For example, one frame
per second is obtained at 1
Mbps.
Outputs the signal by
converting a transmitted VGA,
SVGA or XGA signal into an
XGA signal. The high-
resolution picture can be
obtained. You can view more
vivid picture than the picture
output from the RGB OUT
connector on the
Communication Terminal. The
number of frames displayed per
second depends on the interface
transmission rates. For
example, five frames per second
is obtained at 1 Mbps with an
ISDN connection (three frames
per second with a XGA
transmission).
a
: High,
f
: Middle, : Low
187