Sony IPELA PCS-G70 Operating Instructions Manual page 214

When both PCSA-M3G70 H.323 MCU software (for LAN) and PCSA-
M0G70 H.320 MCU software (for ISDN) are installed
Select Multipoint and a drop-down list is displayed to the right of text boxes A to E.
For LAN: Select "IP" from the drop-down list, and enter the IP address.
For ISDN: Select "ISDN" from the drop-down list, and enter the line number.
For ISDN (Telephone): Select "TEL" from the drop-down list, and enter the
telephone number.
For SIP: Select "SIP" from the drop-down list, and enter the address.
Enter all the parties for the multipoint videoconference.
For details on the setups, see step 5 in "Registering a New Remote Party"
on page 77.
5
Select "Save", then press the PUSH ENTER button.
The registration of the multipoint connection list is completed.
To specify a remote party registered in the Phone Book to the multipoint
connection list
1
Use the V, v, B or b button on the Remote Commander to select the name
you want to register in the multipoint connection list.
2
Press the
ENTER button to open the submenu, press the V or v button to select "
On", then press the PUSH ENTER button.
The
the list and the remote party is registered in the multipoint connection list.
214
Setting for a Multipoint Videoconference
button on the Remote Commander, or press the PUSH
(multipoint) mark is added to the upper right of the selected name in