3
Enter "Registered User Name" and "Password" on page 2 of the SIP Setup
menu.
SIP Setup
Registered User Name
Password
Note
On the Communication Terminal with the PCSA-M3G70 H.323 MCU software
installed, enter the user names and passwords for all the terminals to be connected
for a multipoint videoconference. Up to 5 terminals can be registered.
4
Enter the address and port number for the SIP server on page 4 of the SIP
Setup menu.
Note
Up to four SIP servers can be set up. To set up multiple SIP servers, enter the
addresses and port numbers for all the SIP servers on page 4 to page 7.
SIP1
****
Save
Cancel
Preparing for a Videoconference Using SIP
239