Sony IPELA PCS-G70 Operating Instructions Manual page 289

Message
Remote party of the transfer destination
disconnected.
Remote party of the current call to be
transferred disconnected.
The held call has been resumed.
The operation is not available as some line is
in the hold mode.
Cascade connection via SIP is not available. You cannot use a cascade connection using SIP.
The line has disconnected as you failed in
putting the call on hold.
Settings cannot be changed during
recording.
Settings cannot be changed during a
streaming broadcast.
The search failed.
Starts a conference. (The encryption feature
is enabled.)
Starts a conference. (The encryption feature
is disabled.)
The conference could not start because the
encryption feature at the near-end side was
disabled.
The conference could not start because the
encryption feature at the far-end side was
disabled.
The conference could not start because the
signal encryption method at the near-end
side differed from that of the far-end side.
The standard encryption videoconference
with SIP connection is not available.
The Sony encryption videoconference with
ISDN connection is not available.
Meaning
The remote party of the transfer destination
disconnected.
The remote party of the current call to be
transferred disconnected.
Hold has been canceled and the held call resumes.
Operation unavailable as there is a line in hold
mode.
The line has disconnected due to failure in putting
the call on hold.
Change the setting after recording ends.
Change the setting after the streaming broadcast
ends.
The search has failed.
The conference starts with the encryption feature
enabled.
The conference starts with the encryption feature
disabled.
Enable the encryption feature.
Have the far-end side enable their encryption
feature.
Select the same signal encryption method as the
far-end side.
Change connection methods, or switch to Sony
encryption.
Change connection methods, or switch to standard
encryption.
On-screen Messages
289