Starting a Multipoint Videoconference
Calling Remote Parties
To call remote parties registered in the multipoint connection lists
1
Select the multipoint connection list registered in the Phone Book.
The multipoint connection lists are marked with "
2
Press the CONNECT/DISCONNECT (
Commander, or press the PUSH ENTER button to display the submenu,
press the V or v button to select "
button.
The system begins dialing the numbers of the remote parties registered in the
multipoint connection list. "Dialing" appears on the monitor screen, and the
ON LINE indicator (blue) on the Communication Terminal blinks.
When the system connects to all the remote points, the message "Meeting
starts!" appears on the screen, and the ON LINE indicator stops blinking and
lights.
To call remote parties by selecting from the Phone Book
1
Select a remote party to which you want to connect for a multipoint
videoconference from the Phone Book.
2
Press the
ENTER button to open the submenu, press the V or v button to select "
On", then press the PUSH ENTER button.
216
Starting a Multipoint Videoconference
button on the Remote Commander, or press the PUSH
IP".
/
) button on the Remote
Dial", then press the PUSH ENTER