Connection Example With A Whiteboard - Sony IPELA PCS-G70 Operating Instructions Manual

Connection Example With a Whiteboard

Notes
• Be sure to turn off all the equipment before making any connections.
• Do not connect/disconnect the cable with the power on. Doing so may damage the
Camera Unit, Communication Terminal or mimio Xi.
MCU VIDEO OUT AUDIO OUT
(MIXED)
1 2 3 4 5
DC 19.5V
IR OUT
AUX CONTROL
1 2 CTRL-S
AUX
VIDEO OUT
to WHITE BOARD
Dedicated cable
(supplied with the mimio Xi)
Notes on using the mimio Xi
• Do not use any cable other than the dedicated cable supplied with the
recorder.
• Attach the capture bar at the upper left corner of the whiteboard.
• Use only the stylus, marker and eraser that come with the mimio Xi for
writing on a whiteboard.
• Do not connect a device other than the mimio Xi to the WHITE BOARD
connector on the Communication Terminal.
192
Connection Example With a Whiteboard
TERMINAL VISCA OUT
AUDIO IN MAIN SUB
AUX LINE MIC CAMERA AUX IN CAMERA AUX IN
(PLUG IN POWER)
1 2
WHITE 100BASE-TX/
1 2
EC-MIC RGB OUT BOARD 10BASE-T DSB
1 2 ISDN UNIT
MONITOR
Whiteboard
mimio Xi capture bar