Conducting a Videoconference Using
the Dual Video Function
The dual video function allows the simultaneous sending and receiving of two
images using two cameras.
Notes
• When using integrated LAN and ISDN connections or a LAN cascade
connection, the dual video function cannot be used.
• The video broadcast with the dual video function is only data from a single
location.
System Configuration Using 2 Cameras and 3 Monitors
This section describes how to configure a system using 2 cameras and 3 monitors.
Notes
• Be sure to turn off all the equipment before making any connections.
• Do not connect/disconnect the camera cable with the power on. Doing so may damage
the Camera Unit or Communication Terminal.
128
Conducting a Videoconference Using the Dual Video Function