Figure 2-6 Releasing The System Module From The Frontplane; Removing The System Module - Silicon Graphics Octane2 Owner's Manual

After powering off your workstation, attaching the wrist strap, and waiting five
minutes for the heat sinks to cool, you can remove the system module.
2. Pull both sliding handles simultaneously until they are completely extended, as
shown in Figure 2-6.
This action releases the system module from the workstation.
Releasing the System Module from the Frontplane
Figure 2-6
Caution: To avoid damaging the module, do not attempt to remove the module by
pulling the sliding handles.

Removing the System Module

37