Numalink Cabling For A Silicon Graphics Prism; Figure 1-10 Numalink Cabling In A Two-Module System - Silicon Graphics Prism Visualization System User Manual

NUMAlink Cabling for a Silicon Graphics Prism

007-4701-003
If your system was shipped from SGI with the modules already mounted in a rack and
the NUMAlink cables pre installed, you should proceed to "Optional SGI ImageSync
Cabling" on page 16 to continue.
This section describes the NUMAlink cabling for the basic configuration. For additional
NUMAlink cabling information, see "System Configurations" on page 60.
Figure 1-10 shows a system with a base compute module and one XG2N graphics
module.
REPEAT
L1 PORT
CONSOLE
CONSOLE L1 PORT
Figure 1-10 NUMAlink Cabling in a Two-module System
IS2 IS1
NUMALINK 1
NUMALINK 0
NUMAlink 0 NUMAlink 1
NUMALINK 0 CPU NUMALINK 1
NUMAlink 0 NUMAlink 1
Quick Start Information
PCI 4
PCI 3
PCI 2
PCI 1
XG2N
module
Base compute
module
15