Figure 1-24 System Shutdown Notifier; Figure 1-25 Power Button And Reset Button; Shutting Down And Powering Off The Octane2 Workstation - Silicon Graphics Octane2 Owner's Manual

Within a few seconds, a shutdown notifier appears, as shown in Figure 1-24. Within
a minute, the system powers off automatically.
Figure 1-24 System Shutdown Notifier
3. Turn off your monitor by pressing the monitor power button.
If your system does not power off and you do not see any activity for several
minutes, follow the next step.
4. Press the power button again.
If you press the power button a second time, the system should power off
Note:
immediately, but this method does not perform a clean shutdown. Avoid using this
method unless the system does not respond for several minutes after initially
pressing the power button.
If pressing the power button a second time does not work, use a pencil or pen to
press the reset button, shown in Figure 1-25. If the system still fails to power off,
unplug the power cable from the back of your workstation and contact your service
provider.
Figure 1-25 Power Button and Reset Button

Shutting Down and Powering Off the Octane2 Workstation

Power button
Reset button
25