Using Automatic Address Assignment - Tally Dascom 7006 User Manual

N e t w o r k P r i n t i n g
The screen should look like this:

Using Automatic Address Assignment

Automatic address assignment, known as DHCP configuration, is only possible if the net-
work being used supports it. If the network does support DHCP, put the printer into
DHCP mode by selecting the DHCP checkbox under the address fields in the Ethernet
Settings area. It is not necessary to enter any addresses in the fields above.
In addition to the DHCP check box, select the LPD and RTEL check boxes. Type 9100 in
the RTEL Port Number field and type 32768 in the Ethernet Text Buffer Size field.
For the printer to receive its address from the network, it must be connected to the net-
work when it is turned on. If the printer is not connected to the network when set to
DHCP mode, the mode setting will take effect, but the printer will not actually receive a
new address until it is connected to the network and restarted.
6-2