Printhead Assembly Replacement - Tally Dascom 7006 User Manual

Printhead Assembly Replacement

NOTE: If the printer is within the warranty period, the user must must contact
an authorized repair center or authorized field technician. All user's must not
replace the printhead assembly or platen assembly if the printer in under war-
ranty.
1. Attach the new printhead assembly to the printhead harness, and attach the LED
harness to the LED connector.
2. Then, position a cable tie through the hole in the printhead bracket and around all
wires.
3. Position and tighten the tie as shown. Clip off the excess tie.
C l e a n i n g a n d P r e v e n t i v e M a i n t e n a n c e
11-5