Printer Power Test - Tally Dascom 7006 User Manual

G e t t i n g S t a r t e d

Printer Power Test

The power supply indicates power with a green light. The next step verifies the printer is
receiving power.
4. Press the power switch (D in Figure 2-17 below) to the ON position.
NOTE: The power light on the top user interface cover turns green to indicate
the unit is receiving power.
The READY light first turns red, then auburn, then green when the printer is
ready to print.
Device
A – POWER light
B – READY indicator
C – FEED button
D – ON/OFF switch
2-20
Figure 2-17: Powering ON the Printer
Primary Function
Shows power status
Shows printer status
Advances print media
Controls printer power
Use
ON – printer on and ready to print
OFF – no power applied
GREEN – printer ready to accept data
RED – printer error, empty media roll, or paused
operation during batch mode processing
OFF – no power applied
Press to advance media
Press and hold while turning unit on to initiate self test
and print current configuration
Press to turn printer on and off