Tally Dascom 7006 User Manual page 47

8. Place the media under the media guide bar as shown in Figure 2-46.
Figure 2-46: Place the Media Under the Media Guide Bar
9. Lower the media between the two media guides. Position the media as shown in Fig-
ure 2-47. Before completely lowering the spindle in the slots as shown, unlock the
guides if they are locked, so they can spring load against the sides of the media roll.
Figure 2-47: Lower the Media Roll Into Lower Media Guide Slots
G e t t i n g S t a r t e d
2-37