Setting Up The Printer; Printer Requirements - Tally Dascom 7006 User Manual

G e t t i n g S t a r t e d

Setting Up the Printer

Setting up the printer is an easy process. This chapter describes printer requirements,
printer controls, loading thermal transfer ribbon, and loading print media. The printer
self test is also described. Be sure to follow all steps in sequential order as listed in this
User's Guide to avoid electric shock or damage to the printer.

Printer Requirements

The printer has the following operational requirements.
Communications
• Serial – Standard RS-232 (requires a custom cable, refer to Chapter 10)
• Parallel – Uni-directional parallel interface (requires a custom cable, refer to Chap-
ter 10)
• USB A Host Interface – USB cable, MSD, HID
• USB B 2.0 Device Interface – USB cable
• Ethernet 10/100 (Optional) – Standard 10Base-T Cat 5e interface cable
Auto-detectable 90-264VAC, 24VDC 150 W power supply
Operating environment: 41ºF to 104ºF (5ºC to 40ºC)
20% to 85 % non-condensing R. H. (relative humidity)
Storage/transportation environment: -4.0ºF to 122ºF
(-20ºC to 50ºC) 5% to 95% non-condensing R. H. (relative humidity)
2-12