ENTER/EXIT PROGRAMMING MODE
Erase Batch Memory
When the reader is configured in Manual Batch Mode, use the following bar code to
erase any labels stored in batch memory.
RF Batch Mode Transmit Delay
Specifies the delay in 10 msec increments between transmitting labels stored in batch
memory.
$CBTTD00
RF Batch Mode Transmit Delay = 50 msec
$CBTTD0A
RF Batch Mode Transmit Delay = 0.5 seconds
$CBTTD64
RF Batch Mode Transmit Delay = 2.5 seconds
242
QUICKSCAN™ 2500
NOTE: Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
Erase Batch Memory
BatchClear
RF Batch Mode Transmit Delay = No Delay
$CBTTD05
RF Batch Mode Transmit Delay =100 msec
$CBTTD32
RF Batch Mode Transmit Delay = 1 second
$CBTTDFA
WIRELESS FEATURES