Statement Of Agency Compliance - Microscan MS-Q Imager User Manual

Statement of Agency Compliance

The MS-Q has been tested for compliance with FCC regulations and was found to be
compliant with all applicable FCC Rules and Regulations.
IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, this
device must not be co-located or operate in conjunction with any other antenna or transmitter.
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
The MS-Q has been tested for compliance to CE (Conformité Européenne) standards and
guidelines and was found to conform to applicable CE standards, specifically the EMC
requirements EN 55024, ESD EN 61000-4-2, Radiated RF Immunity EN 61000-4-3, ENV
50204, EFT EN 61000-4-4, Conducted RF Immunity EN 61000-4-6, EN 55022, Class B
Radiated Emissions, and Class B Conducted Emissions.
The MS-Q can be set to use targeting lasers. The MS-Q's targeting laser emits Class 2M
radiation outside of the product per IEC 60825-1. Class 2M Laser/LED product. Do not
stare into the beam or view directly with optical instruments.
The MS-Q has been tested by an independent electromagnetic compatibility laboratory in
accordance with the applicable specifications and instructions.
MS-Q Imager User's Manual
Laser/LED Radiation
Wavelength: <1mW
Maximum Output: 650-700 nm
Laser Pulse Duration: 0.977 mSec.
LED Pulse Duration: 0.255 uSec.
Introduction
ix