Table of Contents
Advertisement
Beep and Vibrate Settings
Beep and Vibrate Settings
Read the following symbols to configure beep and vibrate settings.
Beep / Vibrate
Vibrate Off / Beep On
(Default)
Beep Volume
Beep Loud (Default)
Beep and Vibrate Settings by ESP
Note: Duration is the length of the beep in milliseconds with a configurable range of 0.000
to 2147483.750. Separation is the spacing in milliseconds between beeps, also with a
configurable range of 0.000 to 2147483.750.
Save
Settings
6-8
Vibrate On / Beep On
Beep Off
Default
Default
to USB
to PS/2
Vibrate On / Beep Off
Beep Quiet
Clear
All Data
MS-Q Imager User's Manual
Clear
XML
Rules
Advertisement
Table of Contents
Need help?
Do you have a question about the MS-Q Imager and is the answer not in the manual?
Questions and answers