Usb Battery Charge Mode - Microscan MS-Q Imager User Manual

USB Battery Charge Mode

USB Battery Charge Mode

If you choose to charge the MS-Q Imager's battery with a USB connection, you have the
option of using USB Battery Charge Mode. This mode dedicates most of the power
available from the USB connection to charging the battery. Read the symbol below to
enable this mode.
Enable USB Battery
Charge Mode
Note: The imager is able to read and decode symbol data while in USB Battery Charge
Mode. After each symbol decode the imager automatically returns to its battery charging
state.
Save
Settings
3-8
Default to Previous Settings
(Disable USB Battery
Charge Mode)
Default Default
to USB to PS/2
Clear
Clear
All Data
XML
Rules
MS-Q Imager User's Manual