Table of Contents
Advertisement
A
Printer Specifications
Host Interface:
1. Serial RS-232 or RS-422 at 600, 1200, 2400, 4800, 9600, 19200,
2. Parallel (Centronics® compatible) or IEEE® 1284 bi-directional.
3. Coax/Twinax (optional).
4. PrintNet™ (optional).
The RS-232 and RS-422 host interfaces shall have the following
characteristics:
Character Set:
Word Length:
Handshaking:
Input Buffer:
Electrical:
Power Source:
Circuit Protection
Grounding:
Environmental:
Operating:
Storage Temperature:
Specifications
38400, 57600, or 115200 baud.
ANSI® ASCII character set
Selectable 7-bit or 8-bit data format
XON/XOFF (in receive mode only) and CTS/
DTR
Selectable from 1k through 16 k bytes. XOFF is
transmitted and DTR goes low when buffer is
equal to or greater than 75% full. XON is
transmitted and DTR goes high when buffer is
equal to or less than 25% full. Characters are
transmitted with no parity from the printer
115 or 230 VAC 50/60Hz switching power
supply.
One T6.3 Amp, 250V (Time Lag) fuse.
Unit must be connected to a properly grounded
receptacle.
40° F to 104° F (4° C to 40° C)
-40° F to 150° F (-40° C to 60° C)
117
Advertisement
Table of Contents
Troubleshooting
