Table of Contents
Advertisement
Printing Specifications
Type
Resolution:
Print Speed:
Bar Code Modulus:
Maximum Print Width:
Maximum Print Length:
Minimum Print Length:
White Space Slew Rate:
Minimum Dot Size:
Label Backfeed:
Fonts:
Resident Fonts:
Optional Fonts:
Font Expansion:
Bar Codes:
Media:
Type:
Supply Roll:
Internal Rewinder:
Direct thermal or thermal transfer
203 dots per inch (8.0 dots/mm)
2 to 6 ips (inches per second)
10 mil to 127 mil "X" dimension in picket or
ladder orientation.
4.09 inches (103.9 mm)
47 inches (with standard memory) using 4.09
inch print width
.500 inches
2 to 6 inches per second
.0033 inches (0.083 mm) square
For label dispensing modes and optional media
cutter
Courier Bold, Triumvirate Bold Condensed, and
Letter Gothic scaleable outline fonts and bit-
mapped OCR-A, OCR-B.
A wide selection of scaleable outline
proportional and monospace fonts is available.
All fonts expandable vertically and horizontally.
Code 39, Interleaved 2 of 5, Code 128 (subsets
A, B, and C), Codabar, UPC-A, UPC-E, UPC 2-
& 5-digit addendums, EAN-8, EAN-13, EAN 2-
& 5-digit addendums, Code 93, MSI Plessey,
UPCSHIP (IGP/VGL only), UCC 128, Postnet,
PDF 417 (IGP/PGL only), FIM.
Roll-fed, die-cut continuous or fan-fold labels,
tags or tickets; most direct thermal or thermal
transfer materials.
8 inches (203 mm) maximum diameter on 3
inch (76 mm) diameter cores.
7 inches (178 mm) maximum diameter on 1
inch (25 mm) diameter cores.
Accepts a 5 inch diameter roll of labels or label
backing.
119
Advertisement
Table of Contents
Troubleshooting
