Shaft Support Housings - Printronix T4204 Maintenance Manual

Chapter 4
Removal Procedures

Shaft Support Housings

To remove shaft support housings, follow the steps below and refer to Figure
28.
1. Remove the top cover assembly (page 52).
2. Remove the label and ribbon tube assemblies (page 90).
3. Remove the screws (1) securing the shaft support housings (2) to the
center panel (3).
4. Remove the shaft support housings.
2
92
2
2
3
Legend:
1) Screw (2 per housing)
2) Shaft Support Housing
3) Center Panel
Figure 28. Shaft Support Housings
1