Factory Default - Sound Devices 788T-SSD User Manual And Technical Information

# Setup Name
10 Rec: Track Names
11 Rec: Take Name/Number
12 Rec: Take Reset Mode
13 Rec: Pre-Roll Time
14 Rec: Timer Start
15 Rec: Timer Stop
16 Rec: Record Indicator
17 Input: Track Routing
788T/788T-SSD User Guide and Technical Information
Description
Allows user to give tracks more
descriptive names, which show up in
iXML and bEXT metadata.
Numeric, auto-incrementing number
used for take identification.
Defines when take numbers are reset.
Reset brings take number to <1>.
Sets the amount of time that is re-
corded prior to pressing the REC key.
Sets a specific start time/date for
unattended recording. Unit must be
powered.
Sets a specific time/date to stop
recording. May be used with or
without the Rec: Timer Start. May
be set before the Timer Start time to
temporarily stop recording and then
resume recording with Timer Start.
Sets how the large display looks
when the unit enters record.
Allows the user to setup the routing
matrix among all available inputs and
tracks. There are preset routings and
three custom routings available.
Press and hold the STOP key then
press the INPUT key repeatedly to
cycle through all preset routings. This
only routes Inputs to Tracks, Track
arming is done independently in the
Track Settings Window.
Options
• Mix L • Track H
• Mix R • Track Aux 1
• Track A • Track Aux 2
• Track B • Mix
• Track C • Boom
• Track D • <Add New Entry>
• Track E • <Load List From INHDD>
• Track F • <Save List From INHDD>
• Track G
<selectable alpha character + integers up to
32000, with or without preceding 0's>
• Never
- take numbers do not reset
• When scene is changed
- take resets when scene name is changed
• When daily folder changes
- takes reset on new day
• Either scene or daily
- takes reset on either change
0–10 sec. @ 48 kHz
<enter time, date>
<enter time, date>
• Normal Numbers
• Reverse Numbers
• Flash Numbers
• 2 track (1:L, 2:R)
• 2 track (1:A, 2:B)
• 4 track (1:L..4:B)
• 4 track (1:A..4:D)
• 6 track (1:L..6:D)
• 6 track (1:A..6:F)
• 8 track (1:L..8:F)
• 8 track (1:A..8:H)
• 1 mix (L), 6 Iso (A-F)
• 1 mix (L), 8 Iso (A-H)
• 2 mix (L,R) 6 Iso (A-F)
• 2 mix (L,R), 8 Iso (A-H)
• Custom Route 1
• Custom Route 2
• Custom Route 3
• Edited
Factory
Default
Track L = Mix L
Track R = Mix R
Track A = Track A
Track B = Track B
Track C = Track C
Track D = Track D
Track E = Track E
Track F = Track F
Track G = Track G
Track H = Track H
Track X1 = Aux 1
Track X2 = Aux 2
T01
Either scene or
daily
2 Seconds
(disabled)
(disabled)
Normal Numbers
• 2 mix (L,R) 6 Iso
(A-F)
Input 1 = Track L,A
Input 2 = Track R,B
Input 3 = Track L,C
Input 4 = Track R,D
Input 5 = Track L,E
Input 6 = Track R,F
97