Sound Devices 788T-SSD User Manual And Technical Information page 101

# Setup Name
34 File: Max Size
35 File: Folder Options
36 File: View Files
37 File: View Take List
38 File: Copy Files
39 File: Copy Flag Reset
40 Time Code: Frame Rate
41 Time Code: Mode
42 Time Code: Hold Off
788T/788T-SSD User Guide and Technical Information
Description
Selects the file size when the 788T
will close, then start a new file. The
788T will not record a file larger than
the selected size.
The largest file permissible with the
788T's FAT32 file system is 4 GB
Allows the user to organize files in
root and sub-folders. For no folders,
select <None> on every level.
Enters the file directory tree for the
selected drive.
Allows the user to view the last 200
takes. Takes can be designated as
Circled Takes or False Takes from the
Take List.
Allows the user to select a file or a
range of files to be copied from one
storage media to another. Files will
only be copied from their current
directory to a directory of the same
name on the other media. If a file will
not fit on the destination media, the
user is given the option to skip that
file and continue with the copy or
abort copying all together. After the
copy process has been completed,
the recorder will display how many
files were successfully copied.
Selects whether the flag bit is cleared
or not on files copied from one media
to another.
Sets the time code frame rate. All
common time code frame rates are
available.
Sets the mode for the time code
generator
Sets the duration that a valid time
code signal has to be recognized by
the 788T before generating a new
take while in Ext TC-Auto Record and
Ext TC/cont-Auto Record modes.
Options
• 4 GB
• 2 GB
• 1 GB CF
• 640 MB
• 4 GB CF (3.6 GB)
• 2 GB CF (1.8 GB)
• 1 GB CF (950 MB)
• 512MB CF (450 MB)
• TOP-LEVEL <None>, <Add new entry>
(Project) <None>,<Add new entry>,
•MID-LEVEL (Roll) <Daily>
• BOTTOM-LEVEL <None>, <Add new
(Scene) entry>, <Scene>
Highlight media descriptor to navigate the
menu
• Take -
• Take +
• Circle
• Copy all {drive} {drive}
• Last 24 hr {drive} {drive}
• Last 48 hr {drive} {drive}
• Flagged {drive} {drive}
All files, when recorded, automatically have
their flag bit set to "on"
• Disabled
• Enabled
• 23.976
• 24
• 25
• 29.97
• 29.97DF
• 30
• 30DF
• 30+
• Off
• Free Run
• Free Run - Jam Once
• Record Run
• 24 Hr Run
• Ext TC
• Ext TC/cont
• Ext TC-Auto Record
• Ext TC/cont-Auto Record
0.0 to 8.0 seconds adjustable in increments of
.1 seconds
Factory
Default
2 GB CF (1.8 GB)
None
Enabled
30
Free Run
2.0 sec
99