Sound Devices 788T-SSD User Manual And Technical Information page 7

8. The Input Settings Window is where changes are made to input parameters. For example, press the
TONE key to toggle Phantom Power on and off. Turn the Multi-Function Rotary Switch to adjust the
High-Pass Filter Frequency.
MENU
HDD
9. INPUTS MUST BE ROUTED TO TRACKS FOR RECORDING. From the Input Settings Window, press
the PLAY key to enter Input-to-Track Routing. Inputs can be assigned to any Track. The Rewind and
Fast-Forward keys route inputs to Track L and R, respectively. Turn the Multi-Function Rotary Switch
to move among Tracks A - X2. Push in on the rotary switch to route the input to the track. Refer to the
788T User Guide for details on pre- and post-fade routing. Press PLAY again to return to the Input Set-
tings Window.
MENU
HDD
Press PLAY to enter
Input-to-Track routing.
Press again to exit.
10. Momentarily move the Input Selector Switch again to return to the main display.
11. Press the MENU key to enter the Setup Menu. The Setup Menu allows you to confi gure various
options, including Sampling Rate, Bit Depth, Time Code, etc. Navigate through the Setup Menu by
turning the Multi-Function Rotary Encoder. Refer to the 788T/788T-SSD User Guide for Setup Menu
details.
788T/788T-SSD User Guide and Technical Information
MENU
1 3 5 7
2 4 6 8
HDD
Turn the Multi-Function Rotary Switch
MENU
HDD
788T
INPUT
ARM ARM
R C
L D
A E
B F
0
d BFS
REC
IN CF EX
Press REW to route to
Track L, Press FF to
route to Track R. Use the
Multi-Function Rotary
Switch to route to Tracks
A - X2.
PWR
0
d BFS
5