788T/788T-SSD User Guide and Technical Information
2.
Select an unassigned shortcut number for programming. If a duplicate key sequence is selected the low-
est shortcut number action takes place. The example below shows the F1 key being reprogrammed.
3.
After selecting a key sequence, select the desired Setup Menu item or action. The example below shows
the reprogramming of the F1 key to change the sampling rate to the next setting in the list.
If a single key or key combination is programmed for multiple shortcuts, the shortcut with the lowest
number will take precedence.
Shortcut List Functionality
The shortcut list is a user defi nable list of keyboard keys/Logic In that perform specifi ed actions.
The actions that a keyboard key can perform are listed in the below table.
Action
Momentary Key
Toggle Key
Open Menu
Cycle Settings
Set Settings
Open Time Code Menu
Jam Time Code Item
Edit Time Code Item
Key Shortcuts
Logic In
The Logic Input enables external devices to initiate functions on the 788T. This is commonly used for
"remote rolling" using a mixing console with a record control.
The function assigned to the logic input is set in the Setup Menu option
Almost any 788T function can be assigned. The default function is RECORD.
88
v. 1.71
Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Specific Setup
Menu options can
be programmed if
multiple options are
available.
Simulates selected button. Can simulate in any menu
Toggles the state of selected key. Only Play and Record are supported
Opens a SetupUI Menu
Cycles a SetupUI parameter to the next setting and saves it
Sets a SetupUI parameter to the given setting and saves it
Opens the TimeCode: Jam Menu and goes to the given parameter
Jams given TimeCode parameter
Opens the TimeCode: Jam Menu Edit screen for the given parameter
Simulates a front panel key shortcut. Ex: (Stop+Play) opens TakeList Menu
Function
KEYBOARD/LOGIC IN: ASSIGN
.
Need help?
Do you have a question about the 788T-SSD and is the answer not in the manual?
Questions and answers