Table of Contents
Advertisement
Figure 269 SWITCHING > VLAN > VLAN Status > VLAN Status Details
The following table describes the labels in this screen.
Table 198 SWITCHING > VLAN > VLAN Status > VLAN Status Details
LABEL
VID
Elapsed Time
Status
Port Number
56.4 Configure a Static VLAN
Use this screen to view and configure a static VLAN for the Switch. Click SWITCHING > VLAN > VLAN
Setup > Static VLAN to display the screen as shown next.
Figure 270 SWITCHING > VLAN > VLAN Setup > Static VLAN
Chapter 56 VLAN
DESCRIPTION
This is the VLAN identification number that was configured in the corresponding VLAN
configuration screen.
This field shows how long it has been since a normal VLAN was registered or a static VLAN was
set up.
This field shows how this VLAN was added to the Switch.
•
Dynamic: using GVRP
•
Static: added as a permanent entry
This section displays the ports that are participating in a VLAN. A tagged port is marked as T, an
untagged port is marked as U and ports not participating in a VLAN are marked as "–".
XGS2220 Series User's Guide
371
Advertisement
Table of Contents
Troubleshooting
