Caller Id Control - Tadiran Telecom FlexSet 280 User Manual

Caller ID Control

The Caller ID Control feature enables you to allow or restrict presenting of
your telephone number to the called party for external calls. Your telephone is
pre-set in the system to either restrict or display your Caller ID to the called
party. Operating this feature overrides this setting on a per-call basis, if
permitted by COS.
To make a call with a Caller ID Restricted:
(the called station normally displays your ID)
1. Dial #1444 followed by activation code
or
[ID CONTROL]
Press ,
then
2. Make call as required.
To make a call with Caller ID displayed:
(the called station normally does not display your ID)
1. Dial #1444 followed by cancellation code
or
[ID CONTROL],
Press the lit
2. Make call as required.

Notes: 1) When you have a Caller ID programmed key, the LED is lit when
Caller ID Control is restricted from your station.
2) To program a key with the Caller ID Control feature, use feature
code #1444.

Caller ID Control

.
.
then
#1444
Display Message
I D . A L L O W E D
D I A L
I D . R E S T R I C T E D
I D . R E S T R I C T E D
D I A L
I D . A L L O W E D
41
Key LED
O F F
O N
O F F
O N
O F F
O N
FlexSet 120/280 User Guide