Removing The Under Bracket; Checking The Steering Head - Yamaha YZF-R6T Supplementary Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
STEERING HEAD
EAS00679

REMOVING THE UNDER BRACKET

1. Stand the motorcycle on a level surface.
WARNING
Securely support the motorcycle so that
there is no danger of it falling over.
2. Remove:
S steering stem nut
S washer
S upper bracket
S lock washer
S rubber washer
S ring nut 1
(with the steering nut wrench 2 )
NOTE:
Hold the lower ring nut with the exhaust and
steering nut wrench, and then remove the upper
ring nut with the ring nut wrench.
Steering nut wrench
90890-01403, YU-33975
WARNING
Securely support the under bracket so that
there is no danger of it falling over.
EAS00681

CHECKING THE STEERING HEAD

1. Wash:
S bearings
S bearing races
Recommended cleaning solvent
Kerosene
2. Check:
S bearings 1
S bearing races 2
Damage/pitting ! Replace.
4-65
CHAS