Yamaha YZF-R6T Supplementary Service Manual page 49

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
FRONT FORK
e. Press down on the spacer with the fork
spring compressor
f. Pull up the rod puller and install the rod
holder between the nut
spacer .
NOTE: NOTE:
Use the side of the rod holder that is marked
"B".
Fork spring compressor
90890-01441, YM-01441
Rod holder
90890-01434, YM-01434
g. Remove the rod puller and adapter.
h. Install the nut
fied .
Distance
11 mm (0.43 in)
i. Set the cap bolt distance
tion.
Distance
13 mm (0.51 in)
j. Install the damper adjusting rod and cap
bolt, and then finger tighten the cap bolt.
k. Hold the cap bolt and tighten the nut to
specification.
Nut
15 Nm (1.5 m•kg, 11 ft•lb)
l. Remove the rod holder and fork spring
compressor.
WARNING
• The fork spring is compressed.
• Always use a new cap bolt O-ring.
42
CHAS
.
and the
and position it as speci-
to specifica-