Yamaha YZF-R6T Supplementary Service Manual page 209

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
CHANGING THE ENGINE OIL
6. If the oil filter cartridge is also to be replaced,
perform the following procedure.
a. Remove the oil filter cartridge 1 with an oil
filter wrench 2 .
b. Lubricate the O-ring 3 of the new oil filter
cartridge with a thin coat of engine oil.
CAUTION:
Make sure the O-ring 3 is positioned cor-
rectly in the groove of the oil filter cartridge.
c. Tighten the new oil filter cartridge to specifi-
cation with an oil filter wrench.
7. Replace:
S engine oil drain bolt gasket
8. Install:
S engine oil drain bolt
(along with the new gasket)
9. Fill:
S crankcase
(with the specified amount of the recom-
mended engine oil)
3-26
CHK
ADJ
Oil filter wrench
90890-01426, YU-38411
Oil filter cartridge
17 Nm (1.7 mSkg, 12 ftSlb)
New
43 Nm (4.3 mSkg, 31 ftSlb)
Quantity
Total amount
3.4 L (2.99 Imp qt, 3.59 US qt)
Without oil filter cartridge
replacement
2.4 L (2.11 Imp qt, 2.54 US qt)
With oil filter cartridge
replacement
2.6 L (2.29 Imp qt, 2.75 US qt)