Yamaha YZF-R6T Supplementary Service Manual page 95

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
EAS00753
12. Starting circuit cut-off relay
S Disconnect the starting circuit cut-off relay
coupler from the wire harness.
S Connect the pocket tester (Ω
starting circuit cut-off relay coupler as
shown.
S Check the starting circuit cut-off relay for
continuity.
Positive tester probe !
Negative tester probe !
black/yellow
Positive tester probe !
Negative tester probe !
blue/yellow
Positive tester probe !
blue/black
Negative tester probe !
black/yellow
Positive tester probe !
black/yellow
Negative tester probe !
Positive tester probe !
blue/yellow
Negative tester probe !
Positive tester probe !
blue/yellow
Negative tester probe !
blue/black
email: info@motomatrix.co.uk
1) to the
sky blue
1
2
sky blue
1
Continuity
3
4
2
2
1
sky blue
3
No
continuity
sky blue 1
3
4
IGNITION SYSTEM
NOTE:
When you switch the positive and negative
tester probes, the readings in the above chart
will be reversed.
S Are the tester readings correct?
YES
13. Lean angle cut-off switch voltage
S Remove the lean angle cut-off switch.
S Connect the pocket tester (Ω
lean angle cut-off switch terminals as
shown.
Positive tester probe ! blue
Negative tester probe ! yellow/green
Lean angle cut-off switch voltage
Less than 65_
Approximately 1 V
More than 65_
Approximately 4 V
S Is the lean angle cut-off switch OK?
–23–
ELEC
NO
Replace the starting
circuit cut-off relay.
1) to the
!
a
!
b