Yamaha YZF-R6T Supplementary Service Manual page 435

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
WATER PUMP
Mechanical seal installer
90890-04078, YM-33221 4
Middle driven shaft bearing driver
90890-04058, YM-04058 5
Quick Gasket
ACC-11001-05-01
Yamaha bond #1215
90890-85505
A Push down.
3. Install:
S rubber damper
S rubber damper holder
NOTE:
Before installing the rubber damper, apply tap
water or coolant onto its outer surface.
4. Measure:
S impeller shaft tilt
Out of specification ! Repeat steps (3) and
(4).
CAUTION:
Make sure the rubber damper and rubber
damper holder are flush with the impeller.
Impeller shaft tilt limit
0.15 mm (0.006 in)
1 Straightedge
2 Impeller
6-14
COOL
1
New
2
New