Yamaha YZF-R6T Supplementary Service Manual page 84

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
L To the neutral switch
M Insert the wire harness wrapping clamp to the frame
hole.
N Pass the battery negative lead over the wire har-
ness.
O There should be no interference between the wire
harness and the tip of the rear frame attaching bolts.
P To the coolant reservoir tank
Q To the intake air temperature sensor (air filter case)
R To the oil level switch, sidestand switch and A.C.
magneto
S Install the wire harness wrapping clamp to the stay
of the throttle body.
T Pass the wire harness over the throttle air vent
hose.
email: info@motomatrix.co.uk
CABLE ROUTING
U Pass the wire harness between frame and coolant
hose.
V Pass it through the frame hole.
W Do not catch the coupler when the air filter case is
assembled.
X Clamp the wire harness, left and right handlebar
switch leads and main switch lead. Align the tapping
positions of three leads except the wire harness.
Point the tip of the clamp to the front side of the ve-
hicle.
Y Sealing set of the cover can be either upper or lower
against the frame lower end. However, it should not
be caught.
Z Clamp the wire harness, main switch lead branch
section and radiator fan motor lead.
–12–
SPEC