Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
CONNECTING RODS AND PISTONS
2. Install:
NOTE:
S Apply engine oil onto the piston pin.
S Make sure that the "Y" mark a on the connect-
S Reinstall each piston into its original cylinder
3. Lubricate:
4. Offset:
5. Lubricate:
5-75
S piston 1
(onto the respective connecting rod 2 )
S piston pin 3
S piston pin clip
New
ing rod faces left when the arrow mark b on
the piston is pointing up. Refer to the illustra-
tion.
(numbering order starting from the left: #1 to
#4).
S piston
S piston rings
S cylinder
(with the recommended lubricant)
Recommended lubricant
Engine oil
S piston ring end gaps
a Top ring
b Lower oil ring rail
c Upper oil ring rail
d 2nd ring
e Oil ring expander
S crankshaft pins
S big end bearings
S connecting rod big end inner surface
(with the recommended lubricant)
Recommended lubricant
Engine oil
ENG
4