Installing The Front Wheel - Yamaha YZF-R6T Supplementary Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
FRONT WHEEL AND BRAKE DISCS
d. Measure the brake disc deflection.
e. If out of specification, repeat the adjustment
f. If the brake disc deflection cannot be brought
EAS00545

INSTALLING THE FRONT WHEEL

The following procedure applies to both brake
discs.
1. Lubricate:
2. Lift the wheel up between the fork legs.
3. Insert the wheel axle.
NOTE:
Install the tire with the mark 1 pointing in the
direction of wheel rotation.
4. Lower the front wheel so that it is on the
5. Install the brake calipers by installing the
NOTE:
Make sure that there is enough space between
the brake pads before installing the brake cali-
pers onto the brake discs.
6. Install the brake hose holders by installing
7. Secure the wheel axle by installing the axle
4-6
Brake disc bolt
Front: 18 Nm (1.8 mSkg, 13 ftSlb)
Rear: 30 Nm (3.0 mSg, 22 ftSlb)

LOCTITE
steps until the brake disc deflection is within
specification.
within specification, replace the brake disc.
S wheel axle
S oil seal lips
Recommended lubricant
Lithium-soap-based grease
ground.
bolts, and then tightening them to the speci-
fied torque.
Brake caliper bolt:
40 Nm (4.0 mSkg, 29 ftSlb)
the bolts and nuts.
bolt, and then tightening it to the specified
torque.
Axle bolt:
91 Nm (9.1 mSkg, 66 ftSlb)
CHAS