Adjusting The Front Wheel Static Balance - Yamaha YZF-R6T Supplementary Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
FRONT WHEEL AND BRAKE DISCS
4-7
8. Tighten wheel axle pinch bolt 2 , and then
pinch bolt 1 to specified torque.
9. Retighten pinch bolt 2 to the specified
torque.
Wheel axle pinch bolt:
18 Nm (1.8 mSkg, 13 ftSlb)
10. Tap the outer side of the left fork leg with a
rubber mallet to align it with the end of the
wheel axle.
11. Tighten wheel axle pinch bolt 4 , and then
pinch bolt 3 to specified torque.
12. Retighten pinch bolt 4 to the specified
torque.
Wheel axle pinch bolt:
18 Nm (1.8 mSkg, 13 ftSlb)
13. While applying the front brake, push down
hard on the handlebar several times to
check for proper fork operation.
EAS00549
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
NOTE:
S After replacing the tire, wheel or both, the front
wheel static balance should be adjusted.
S Adjust the front wheel static balance with the
brake discs installed.
1. Remove:
S balancing weight(s)
2. Find:
S front wheel's heavy spot
NOTE:
Place the front wheel on a suitable balancing
stand.
CHAS