Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
ADJUSTING THE REAR BRAKE LIGHT SWITCH
email: info@motomatrix.co.uk
CHECKING THE BRAKE FLUID LEVEL/
3-42
CAUTION:
Brake fluid may damage painted surfaces
and plastic parts. Therefore, always clean
up any spilt brake fluid immediately.
NOTE:
In order to ensure a correct reading of the brake
fluid level, make sure the top of the brake fluid
reservoir is horizontal.
EAS00128
ADJUSTING THE REAR BRAKE LIGHT
SWITCH
NOTE:
The rear brake light switch is operated by move-
ment of the brake pedal.
The rear brake light switch is properly adjusted
when the brake light comes on just before the
braking effect starts.
1. Check:
S rear brake light operation timing
Incorrect ! Adjust.
2. Adjust:
S rear brake light operation timing
a. Hold the main body 1 of the rear brake light
switch so that it does not rotate and turn the
adjusting nut 2 in direction a or b until the
rear brake light comes on at the proper time.
Brake light comes on
Direction
a
sooner.
Brake light comes on
Direction
b
later.
CHK
ADJ