Yamaha YZF-R6T Supplementary Service Manual page 310

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
HANDLEBARS
EAS00674
INSTALLING THE HANDLEBARS
1. Stand the motorcycle on a level surface.
WARNING
Securely support the motorcycle so that
there is no danger of it falling over.
2. Install:
S throttle cables
S throttle grip 1
S right handlebar switch 2
NOTE:
Align the projection a on the right handlebar
switch with the hole b in the right handlebar.
3. Install:
S right handlebar 1
S right handlebar pinch bolt 2
S right handlebar bolt 3
4. Install:
S front brake master cylinder 1
S master cylinder holder 2
CAUTION:
S Install the brake master cylinder holder
with the "UP" mark facing up.
S First, tighten the upper bolt, and then the
lower bolt.
NOTE:
S Align the mating surfaces of the brake master
cylinder holder with the punch mark a on the
right handlebar.
S There should be 8.2 mm (0.32 in) of clearance
between the right handlebar switch and the
brake master cylinder holder.
4-60
CHAS
33 Nm (3.3 mSkg, 24 ftSlb)
13 Nm (1.3 mSkg, 9.4 ftSlb)
13 Nm (1.3 mSkg, 9.4 ftSlb)