Yamaha YZF-R6T Supplementary Service Manual page 496

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
STARTER MOTOR
5. Measure:
S brush length a .
Out of specification ! Replace the brushes
as a set.
Brush length wear limit
3.5 mm (0.14 in)
6. Measure:
S brush spring force
Out of specification ! Replace the brush
springs as a set.
Brush spring force
7.16 X 9.52 N
(730 X 971 gf, 25.77 X 34.27 oz)
7. Check:
S gear teeth
Damage/wear ! Replace the gear.
8. Check:
S bearing
S oil seal
Damage/wear ! Replace the defective
part(s).
EAS00772
ASSEMBLING THE STARTER MOTOR
1. Install:
S brush seat 1
NOTE:
Align the tab a on the brush seat with the slot b
in the starter motor rear cover.
2. Install:
S starter motor yoke 1
S O-ring 2
New
S front cover 3
Srear cover 4
NOTE:
Align the match marks a on the starter motor
yoke with the match marks b on the front and
starter motor rear covers.
8-22
ELEC