Installing The Swingarm - Yamaha YZF-R6T Supplementary Service Manual

Hide thumbs Also See for YZF-R6T:
Table of Contents

Advertisement

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
SWINGARM AND DRIVE CHAIN
EAS00711

INSTALLING THE SWINGARM

1. Lubricate:
S bearings
S spacers
S dust covers
S pivot shaft
2. Install:
S pivot shaft adjust bolt 1
S swingarm
S pivot shaft
NOTE:
Use the pivot shaft wrench 2 and adapter 3 to
tighten the pivot adjust bolt to specification
torque.
3. Install:
S relay arms 1
S connecting rod 2
NOTE:
Install the connecting rod front bolt 3 from the
left.
4. Install:
S rear shock absorber assembly
S rear wheel
Refer to "INSTALLING THE REAR SHOCK
ABSORBER ASSEMBLY" and "INSTAL-
LING THE REAR WHEEL".
5. Adjust:
S drive chain slack
Refer to "ADJUSTING THE DRIVE CHAIN
SLACK" in chapter 3.
4-79
CHAS
Recommended lubricant
Lithium-soap-based grease
6 Nm (0.6 mSkg, 4.3 ftSlb)
95 Nm (9.5 mSkg, 69 ftSlb)
Pivot shaft wrench:
90890-01471, YM-01471
Pivot shaft wrench adapter
90890-01476
44 Nm (4.4 mSkg, 32 ftSlb)
44 Nm (4.4 mSkg, 32 ftSlb)
Drive chain slack
35 X 45 mm (1.38 X 1.77 in)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yzf-r6tcYzf-r6rYzf-r6srYzf-r6rcYzf-r6src

Table of Contents