Figure 1.12 Fc Interface (Installed In A Controller) - Fujitsu ETERNUS DX100 S3 Operation Manual

Chapter 1 Component Name/LED Name
1.1 Controller Enclosures
LED name
LINK/FAULT
LAN ACCESS
LAN LINK
■
Host Interfaces
A host interface is a board that has interface ports to connect a controller to the server.
There are eight types of host interfaces: FC 16Gbit/s, FC 8Gbit/s, iSCSI 10Gbit/s, iSCSI 1Gbit/s, FCoE, SAS, Ether-
net 10Gbit/s, and Ethernet 1Gbit/s.
●
FC
The ports on the host interface are Dual LC connectors for connecting FC cables.

Figure 1.12 FC Interface (Installed in a Controller)

4
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
LED status
(green)
(amber)
(blinks green)
(green)
5 6
Copyright 2014 FUJITSU LIMITED
Meaning
The link between the host interface port and the destination port
has been established.
The host interface port is in error status.
Data is being sent or received via the LAN port (for operation
management).
The link between the LAN port (for operation management) and
the destination has been established.
1
3
2
22
P3AM-7662-04ENZ0