Fujitsu ETERNUS DX100 S3 Operation Manual page 85

Chapter 5 Expansion Functions
5.2 Installing Additional Drive Enclosures
(8)
Attach the "DE_No." labels to the positions shown below.
Attach the labels in the same installation order as the drive enclosures (cable between enclo-
sures connection order).
Right front side of the high-density drive enclosure
(9)
Attach the front cover.
Front cover
5
Check the connection destination of the cables between enclosures.
The connectors on the cable with the "l" symbol are connected to the DI (IN) ports on the added
•
enclosure.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
The DE_No. labels are supplied with the ETERNUS DX.
Copyright 2014 FUJITSU LIMITED
Upper right rear side of the high-density drive enclosure
DE_No. label
85
P3AM-7662-04ENZ0