Fujitsu ETERNUS DX100 S3 Operation Manual page 87

Chapter 5 Expansion Functions
5.2 Installing Additional Drive Enclosures
(ii)
(2)
Connect the power cord on the power socket side.
Connect the other end of the power cord plug to a power socket or an inlet on the power distribu-
tion unit.
8
To add 2.5" / 3.5" type drive enclosures, turn the PSU switches of the power supply units (PSU#0 and
PSU#1) in the drive enclosure to the ON position (marked "|").
9
In the [Add Drive Enclosure] screen, click the [Next>>] button.
Configuration of IOM#0 in the drive enclosure that is to be added and the power supply units in the
system is performed.
When the configuration process is complete, the [Disable IOM#1] screen appears.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
Fasten the plug of the power cord with the release tie.
Wrap the release tie around the power cord and fasten the release tie from either side. Make
sure that the release tie is not loose.
Copyright 2014 FUJITSU LIMITED
87
P3AM-7662-04ENZ0