Chapter 1 Component Name/Led Name; Controller Enclosures; Front; Figure 1.1 Front View Of A 2.5" Type Controller Enclosure - Fujitsu ETERNUS DX100 S3 Operation Manual

Chapter 1
Component Name/LED Name
This chapter provides component names of the ETERNUS DX.
1.1

Controller Enclosures

An operation panel and drives are installed in the front of the controller enclosure. Controllers and power
supply units are installed in the rear.
1.1.1

Front

This section provides the names of the components in the front of a controller enclosure.
■
2.5" Type

Figure 1.1 Front View of a 2.5" Type Controller Enclosure

1 2
3
1. Operation panel
2. 2.5" drive
3. Flange cover
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
14
Copyright 2014 FUJITSU LIMITED
3
P3AM-7662-04ENZ0