Figure 1.7 Host Interface For Fc Cable Connection (Installed In A Controller); Figure 1.8 Host Interface For Copper Twinax Cable Connection (Installed In A Controller) - Fujitsu ETERNUS DX200F Operation Manual

Chapter 1 Component Name/LED Name
1.4 Components (Rear)
■
Host Interfaces
A host interface is a board that has interface ports to connect a controller to the server.
There are two types of host interfaces: FC 16Gbit/s and iSCSI 10Gbit/s.
●
FC, iSCSI 10Gbit/s (for FC Cable Connection)
The ports on the host interface are Dual LC connectors for connecting FC cables.

Figure 1.7 Host Interface for FC Cable Connection (Installed in a Controller)

1
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
●
iSCSI 10Gbit/s (for Copper Twinax Cable Connection)
The ports on the host interface are connectors for connecting Copper Twinax cables.

Figure 1.8 Host Interface for Copper Twinax Cable Connection (Installed in a Controller)

1
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
2 3
2 3
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
5 6
4
5 6
4
17
P3AM-8472-01ENZ0